21
OPERATING MODES
DGBOX has five different
OPERATING MODES:
mode
description
1.
CONFIGURATION
To
access and modify the working parameters;
can also be performed during
operation of the system (system mode WORK), while for particular parameters
editing is possible only mode OUT OF SERIVCE.
2.
TEST
For the
manual testing of the pumps
; the test mode is automatically
interrupted if no operations are performed on the keyboard for more than 60
seconds.
3.
WORK
is the
normal operating mode;
all the operating parameters are controlled,
and the main parameters and alarm messages are displayed.
If during normal operation overloads occur (current or thermal), DGBOX does
not stop the pumps immediately, but automatically reduces the operating
frequency until the parameters are returned to their normal values
4.
OUT OF SERVICE
to stop the system manually, press the START / STOP;
to manually disable the single pump, select it and choose the option STOP.
5.
UPDATE
By means of a normal USB memory it is possible:
-
to download the error message record history
-
to download the set configuration to transfer it to other analogous DGBOX
applications
-
to update the FIRMWARE currently loaded on the power and control boards
with other later-issue ones.
The operating modes are detailed below.
1.
CONFIGURATION
The
CONFIGURATION
MODE is divided
in:
1.1.
BASIC CONFIGURATION
(BASE SETUP)
1.2.
ADVANCED CONFIGURATION
(ADV SETUP)
1.3.
HARDWARE CONFIGURATION
(HARDWARE SETUP)
1.4.
MAINTENANCE
(MAINTENANCE)
To access the CONFIGURATION MODE press the SET key.
To
ACCESS the main
MENU
Press the SET
button for 3 sec.
To SCROLL
the MENU or the
PARAMETERS,
or modify
the
parameters value, use the keys:
To
ACCESS and EXIT
the MENU and the
PARAMETERS use the
keys:
