www.dfi.com
16
Chapter 2 Hardware Installation
Chapter 2
1-2 On: +12V
(default)
2-3 On: +5V
JP7
1
3
2
LCD/Inverter Power Select
JP7 is used to select the power level of the LCD inverter power connector.
1
3
2
JP6
LVDS Backlight Power Select
JP6 is used to select the power level of backlight brightness control of the LVDS port: +3.3V
or +5V.
Important:
Before powering-on the system, make sure that the power settings of JP6 match
the power specification of backlight control. Selecting the incorrect voltage will se-
riously damage the backlight.
1-2 On: +3.3V
(default)
2-3 On: +5V
1
3
2
1
3
2
►
Jumper Settings
►
Jumper Settings