www.dfi.com
15
Chapter 2 Hardware Installation
Chapter 2
PCIE1 Signal Select
LVDS Panel Power Select
JP8
JP8 is used to select the power supplied with the LCD panel.
Important:
Before powering-on the system, make sure that the power settings of JP8 match the
LCD panel’s specification. Selecting the incorrect voltage will seriously damage the
LCD panel.
6
4
2
1-2 On: +12V
3-4 On: +5V
5-6 On: +3.3V (default)
1
5
3
1
5
3
1
5
3
6
4
2
6
4
2
PCIE1
SW1 is used to select the signal of the PCIE1
slot, a PCIe x16 socket that can be configured to
multiple signal lane settings as listed below.
PCIE1 Signal Select
SW1
PCIe x16 (default)
1 On, 2 On
Two PCIe x8
1 Off, 2 On
One PCIe x8 + Two PCIe x4
1 Off, 2 Off
►
Jumper Settings
►
Jumper Settings
