DFI SD106 Скачать руководство пользователя

Страница: 52 / 85

www.dfi.com

Chapter 4 Supported Software

Chapter 4

3. Go through the readme

document for more installa-

tion tips then click Next.

4. Click Finish to exit setup.

►

Intel Graphics Drivers

To install the driver, click “Intel Graphics Drivers” on the main menu.

1. Setup is now ready to

install the graphics driver.

Click Next.

By default, the “Automatically run WinSAT and enable the Windows Aero

desktop theme” is enabled. With this enabled, after installing the graphics

driver and the system rebooted, the screen will turn blank for 1 to 2 minutes

(while WinSAT is running) before the Windows 7/Windows 8.1/Windows 10

desktop appears. The “blank screen” period is the time Windows is testing

the graphics performance.

2. Read the license agreement

then click Yes.

Содержание SD106






















































































Результаты поиска

Содержание SD106

Отзывы:

Похожие инструкции для SD106

Бренды по названию

Популярные бренды

DFI SD106, Руководство пользователя

Результаты поиска

Содержание SD106

Отзывы:

Похожие инструкции для SD106

Бренды по названию

Популярные бренды