DFI SD106, Руководство пользователя

Страница: 45 / 85

www.dfi.com
45
Chapter 3 BIOS Setup
Chapter 3
When Console Serial Redirect is set to enabled, the screen will appear like below:
Enable Console Redirec -
tion Function
Console Redirection Setup
Console Serial Redirect
Terminal Type
Baud Rate
Data Bits
Parity
Stop Bits
Flow Control

COM3
Enable VT-100, 115200, N81

COM4
Disable VT-100, 115200, N81
Advanced
F1 Help ↑/↓ Select Item F5/F6 Change Values F9 Setup Defaults
Esc Exit ←/→ Select Item Enter Select

SubMenu F10 Save and Exit
InsydeH2O Setup Utility
Rev. 5.0
<Enabled>
<VT_100>
<115200>
<8 Bits>
<None>
<1 Bit>
<None>
Terminal Type
Select terminal type: VT_100, , VT_UTF8 or PC_ANSI.
Baud Rate
Select baud rate: 115200, 57600, 38400, 19200, 9600, 4800, 2400 or 1200.
Data Bits
Select data bits: 7 bits or 8 bits.
Parity
Select parity bits: none, even or odd.
Stop Bits
Select stop bits: 1 bit or 2 bits.
Flow Control
Select flow control type: none, RTS/CTS or XON/XOFF.
Console Redirection
This section configures settings relevant to console redirection.
Enable Console Redirec -
tion Function
Console Redirection Setup
Console Serial Redirect
Advanced
F1 Help ↑/↓ Select Item F5/F6 Change Values F9 Setup Defaults
Esc Exit ←/→ Select Item Enter Select

SubMenu F10 Save and Exit
InsydeH2O Setup Utility Rev. 5.0
<Disabled>
Console Serial Redirect
This field is used to enable or disable the console serial redirection function.
► Advanced