www.dfi.com
18
Chapter 2 Hardware Installation
Chapter 2
Important:
Before powering-on the system, make sure that the power settings of JP10 match
the panel’s specification. Selecting the incorrect voltage will seriously damage the
LCD panel.
eDP Panel Power Select
JP10
JP10 is used to select the power supplied with the panel connected via the eDP port.
3-4 On: +5V
5-6 On: +3.3V (default)
6
4
2
1-2 On: +12V
1
5
3
1
5
3
6
4
2
1
5
3
6
4
2
1-2 On: +12V
(default)
2-3 On: +5V
JP2
1
3
2
eDP Inverter Power Select
JP2 is used to select the power level of the eDP inverter power connector.
1
3
2
►
Jumper Settings
►
Jumper Settings