www.dfi.com
38
Chapter 3 BIOS Setup
Chapter 3
SATA Configuration
This section is designed to select the SATA controller and the type of hard disk drive which are
installed in your system unit.
SATA Controller(s)
This field is used to enable or disable Serial ATA devices.
SATA Speed
This field is used to select SATA speed generation limit: Auto, Gen1, Gen2 or Gen3.
SATA Mode Selection
The mode selection determines how the SATA controller(s) operates.
AHCI
This option allows the Serial ATA devices to use AHCI (Advanced Host Controller
Interface).
RAID
This option allows you to create RAID or Intel Matrix Storage configuration on Se-
rial ATA devices.
Port 0, 1, 2, 3 and Hot Plug
These fields are used to enable or disable the serial ATA port and its hot plug.
Enable/Disable SATA
Device.
SATA Configuration
SATA Controller(s)
SATA Speed
SATA Mode Selection
SATA3_0
Port 0
Hot Plug
MINI PCIE (CN10)
Port 1
Hot Plug
MINI PCIE (CN11)
Port 2
Hot Plug
SATA3_3
Port 3
Hot Plug
Advanced
F1
Help
↑/↓
Select Item
F5/F6
Change Values
F9
Setup Defaults
Esc
Exit
←/→
Select Item
Enter
Select
SubMenu
F10
Save and Exit
InsydeH2O Setup Utility
Rev. 5.0
<Enabled>
<Auto>
<AHCI>
Empty
<Enabled>
<Disabled>
Empty
<Enabled>
<Disabled>
Empty
<Enabled>
<Disabled>
Empty
<Enabled>
<Disabled>
USB Configuration
This section is used to configure the parameters of the USB device.
Legacy USB Support
Disabled
Disable USB keyboard/mouse/storage support under UEFI and DOS environment.
Enabled
Enable USB keyboard/mouse/storage support under UEFI and DOS environment.
UEFI
Only Enable USB keyboard/mouse/storage support under UEFI environment.
XHCI Hand-off
Enable or disable to clear XHCI controller ownership change SMI bit by BIOS.
USB keyboard/mouse/stor
-
age support under UEFI
and DOS environment. It
will supporting UEFI en
-
vironment only if set to
UEFI only.
USB Configuration
Legacy USB Support
XHCI Hand-off
Advanced
F1
Help
↑/↓
Select Item
F5/F6
Change Values
F9
Setup Defaults
Esc
Exit
←/→
Select Item
Enter
Select
SubMenu
F10
Save and Exit
InsydeH2O Setup Utility
Rev. 5.0
<Enabled>
<Disabled>
►
Advanced
►
Advanced