DFI PL610-C622, Руководство пользователя

Страница: 37 / 54

www.d fi .com
37
Chapter 3 BIOS Setup
Chapter 3
BMC Configuration
This section configures the BMC related settings.
Watchdog Timer Support
Enable or disable BMC watchdog timer at start of POST.
Not disable in OS
Enable or disable BMC watchdog when boot to OS.
Watchdog Timer Timeout
Enter the number of minutes the system firmware has to boot the OS before it takes
the timeout action. Valid values are from 2 to 8 minutes.
Watchdog Timer Action
Select timeout action: No Action, Hard Reset, Power Down, or Power Cycle.
Power Button
Enable or disable power button function.
Reset Button
Enable or disable reset button function.
Advanced
F1 Help ↑ / ↓ Select Item F5/F6 Change Values F9 Setup Defaults
Esc Exit ← / →  Select Item Enter Select

SubMenu F10 Save and Exit
InsydeH2O Setup Utility
Enable/Disable IPMI Sup-
port. Note: If changing to
enable, BMC detailed in-
formation only valid after
rebooting.
BMC Confi guration
Watchdog Timer Support
Not disable in OS
Watchdog Timer Timeout
Watchdog Timer Action
Power Button
Reset Button
 User Confi guration
Lan Port Confi guration
LAN Channel Number
IPv4
Source
IPv4 IP Address
IPv4 Subnet Mask
IPv4
Gateway Address
IPv6 Mode
IPv4 IP Address
IPv4 Subnet Mask
IPv4
Gateway Address
<Disabled>
<Disabled>
[5]
<Hard Reset>
<Enabled>
<Enabled>
<Dedicated>
[3]
<DHCP>
0.0.0.0
0.0.0.0
0.0.0.0
<Disabled>
[64]
0:0:0:0:0:0:0:0
0:0:0:0:0:0:0:0
Rev. 5.0
User Configuration
User ID
Enter the user ID number for BMC. The max. number is 15.
User Status
Enable or disable the user status.
User Password
Enter the user password.
Channel
Enter the LAN channel number for BMC. The valid LAN channel number is 1, 2, or 3.
Privilege
Select the privilege: Reserved, Callback, User, Operator, Administrator, or No Access.
Add current setting to list
Select this field and press Enter to add current setting to list.
Advanced
F1 Help ↑ / ↓ Select Item F5/F6 Change Values F9 Setup Defaults
Esc Exit ← / →  Select Item Enter Select

SubMenu F10 Save and Exit
InsydeH2O Setup Utility
This is User ID for BMC,
Set/Get User information
according to it. The MAX
User ID number : 15
User Confi guration
User ID
User Status
User Password
Channel
Privilege
Add current setting to list
--------------------
User Id UserName
1 dfi
2 root
3 test1
4
5
6
7
8
9
10
11
12
13
14
15
[1]
<Enabled>
[3]
<Administrator>
Rev. 5.0
UserStatus Channel Privilege
Enabled 1/2/3 Admin/Admin/Admin
Enabled 1/2/3 Admin/Admin/Admin
Enabled 1/2/3 Admin/Admin/Admin
Disabled 1/2/3 N/A/N/A/N/A
Disabled 1/2/3 N/A/N/A/N/A
Disabled 1/2/3 N/A/N/A/N/A
Disabled 1/2/3 N/A/N/A/N/A
Disabled 1/2/3 N/A/N/A/N/A
Disabled 1/2/3 N/A/N/A/N/A
Disabled 1/2/3 N/A/N/A/N/A
Disabled 1/2/3 N/A/N/A/N/A
Disabled 1/2/3 N/A/N/A/N/A
Disabled 1/2/3 N/A/N/A/N/A
Disabled 1/2/3 N/A/N/A/N/A
Disabled 1/2/3 N/A/N/A/N/A