Dewetron DEWE3-PA8 Скачать руководство пользователя страница 21

Страница: 21 / 44

450166 • DEWE3-PA8 • Technical Reference Manual • Printing version 1.0.3 • September 11, 2020

MAIN SYSTEM

DEWE3 / TRION™ / TRION3™ hardware compatibility

In 2019, DEWETRON introduced a new family of data acquisition systems, the DEWE3 and TRION3™ express series.

The DEWE3-PA8 chassis feature a PXIe hybrid backplane and supports any TRION3™ series modules.

It is also backward compatible and does support all TRION™ series modules from previous generation.

The illustrations below will give you an overview of the hardware compatibility and it's limitations:

DEWE3-PA8

series module

(e.g. TRION3-1810M-POWER-4)

max. data throughput

up to 1 GB/s

TRION series module

(e.g. TRION-1820-POWER-4)

DEWE3-PA8

Data troughput

up to 100 MB/s

Synchronization examples

The TRION-SYNC-BUS (SYNC I/O, SYNC OUT) is used to synchronize two or more DEWE3/DEWE2 systems with up

to 100 m distance between each node. The TRION-SYNC-BUS consists of two RJ-45 sockets. One socket being a

synchronization OUT, whilst the other one could either be used as synchronization IN or OUT.
LED indication:

SYNC OUT

SYNC I/O

RED (stable)

Clock detected

Clock detected / Receiving clock

GREEN (stable)

Acquisition running

Depending on the usage of the SYNC I/O (input or output) the LED indicates if the system clock is available or received

correctly from another system. The green LED indicates that the acquisition is running. If the acquisition stops the LED

will be off.

Содержание DEWE3-PA8













































Результаты поиска

Содержание DEWE3-PA8

Отзывы:

Похожие инструкции для DEWE3-PA8

Бренды по названию

Популярные бренды

Dewetron DEWE3-PA8, Техническое справочное руководство

Результаты поиска

Содержание DEWE3-PA8

Отзывы:

Похожие инструкции для DEWE3-PA8

Бренды по названию

Популярные бренды