23
5
5
1
4
2
3
450166 • DEWE3-PA8 • Technical Reference Manual • Printing version 1.0.3 • September 11, 2020
MAIN SYSTEM
Installing a TRION™/TRION3™ module into the DEWE3-PA8
1 DEWE3-PA8 chassis
2 TRION™/TRION3™ series module
3 Injector/ejector handle
4 Module guides
5 Mounting screws
Step 1: Proper ESD precautions must be taken to avoid any damage to the unit.
Step 2: Power off and unplug all connected cables including sensors from the DEWE3-PA8 and TRION™/TRION3™
series modules.
Step 3: Identify a supported TRION™/TRION3™ peripheral slot. Some modules require a TRION™ STAR-slot.
Step 4: Remove the filler panel of an unused TRION™ peripheral or STAR-slot.
Step 5: Place the module edges of the TRION™/TRION3™ modules into the module guides at the
top and bottom of the chassis.
Step 6: Insert the TRION™/TRION3™ module to the rear of the chassis until a resistance appears.
Step 7: Pull up on the injector/ejector handle to latch the device
Step 8: Secure the installed TRION™/TRION3™ front panel to the chassis using the mounting screws.
WARNING:
Unused TRION slots must not remain uncovered! Make sure to reinstall the filler
panels of unused TRION™ slots to guarantee proper cooling of the installed modules.
WARRANTY VOID if the modules overheat due to missing filler panels!
!
Содержание DEWE3-PA8
Страница 4: ...4 PREFACE Notes ...
Страница 6: ...6 TABLE OF CONTENT ...
Страница 44: ...C2 NOTES ...