Dewetron DEWE3-PA8, Техническое справочное руководство

Страница: 18 / 44

18
MAIN SYSTEM
20 Power supply connectors for current clamps
These connectors support ±15 V / +9 V current power probe supply for connecting current clamps. These connectors
are powered by a separate power supply at the rear panel of the instrument.
Input range: 100 .. 240 VAC (power cord included).
3 2 1
4 5 6
Lemo ERA.1S.306
Further information refer to chapter ' Sensor power supply '.
21 TRION3™/TRION™ series module slots
8x slots for TRION3™/TRION™ series modules. The DEWE3-PA8 supports all modules.
For details see chapter ' DEWE3 / TRION™ / TRION3™ hardware compatibility '.
22 Audio I/O interface
Line In / Line Out.
23 Dual LAN GBit connector
The DEWE3-PA8 supports 10/100/1000 Dual LAN with standard RJ45 connector.
24 USB3.1 interface connectors (Universal Serial Bus, 2x)
The USB3.1 Gen 2 interface connectors meet standard USB pin assignment.
25 RS-232 interface connector (COM1)
The RS-232 interface connector (male) is configured as standard RS-232 interface COM 1 and can be used for mouse
or other peripheral units.
1 2 3 4 5
6 7 8 9
Pin assignment
1: DCD (Data Carrier Detector)
2: RD (Received Data)
3: TD (Transmitted Data)
4: DTR (Data Terminal Ready)
5: GND (Ground)
6: DSR (Data Set Ready)
7: RTS (Request To Send)
8: CTS (Clear To Send)
9: RI (Ring Indicator)
9-pin SUB-D connector (male) Schematic
26 DVI connector
The DVI connector meets standard DVI pin assignment.
Pin assignment
1: +15 V
2: -15 V
3: +9 V
4: DGND
5: n.c.
6: DGND
Mating connector:
LEMO FFA.1S.306.CLADxx (xx = depending on cable diameter)