Devolo G3-PLC Modem 500k, Руководство пользователя

Страница: 20 / 42

Configuration
devolo G3-PLC Modem 500k
20
4.3.1Mode: PAN coordinator
If the G3-PLC Modem 500k is to be configured as a PAN coordinator, select the PAN
coordinator mode.
The PAN ID (value range 0 to 255) is the identifier of a G3-PLC network or a PAN
coordinator that you assign once to each G3-PLC network or PAN coordinator specif-
ically during configuration (during setup).
Advanced settings – PAN coordinator
Send all Ethernet packets with high priority
If this option is enabled, all of this device's PLC data packets are sent with high prior-
ity.
We recommend not enabling this setting so that different prioritisations remain possible
depending on the service.
Packets destined for devices which are not on the network are discarded
If this option is enabled, undeliverable Unicast data packets are discarded by the PLC
network without transmission.
Receiver devices are not detected as being available in the network if the number of
consecutive lost packets to that node meets or exceeds the value configured under
Maximum allowed consecutive error events .
Example : 3 is configured. A failed delivery attempt is repeated twice without success.
After that, no more data packets are sent to the receiver for the configured packet dis-
card time. Once the configured packet discard time has elapsed, all data packets are al-
lowed through to that node again.