DEUTSCHMANN AUTOMATION LOCON 7, Инструкция по эксплуатации, Страница: 40 / 50

Technical data Deutschmann Automation GmbH & Co. KG
40 Instruction manual LOCON 7, LOCON 9 V. 10.4 24.5.04
10.2 Technische Daten LOCON 9
Technical data Basic device Options
Operating voltage 24 volt DC ±20%, max. 100 mA Via transfer program on PC
Data protection EEROM (at least 100 years)
no battery required
Programs 16 (thereof 4 externally dialable)
Number of cams 1536 cams, optionally distributable to
channels and programs
cams are interchangeable linewise
Zero offset Programmable over the entire range
Position recording 3SSI absolute encoder
up to 13 bit: gray code
up to 16 bit: binary coded Incremental encoder 24V or 24V-
metering pulses (initiator)
metering frequency max. 10 kHz
counting area max. 65536
Encoder voltage 24 volt
Outputs 8, short-circuit proof, plus-switching
24 volt/0.3A (max. 1A in total)
Inputs 2 inputs for encoder signals
2 inputs for program selection For incremental version:
1 input CLEAR+ (1 µs)
1 select-input
2 inputs incremental signals
Cycle time 70 µs
Rotational speed of the
encoder shaft E. g. 360 inc. encoder:
Error: 1inc
2inc 3inc 4inc ...
--------------------------------------------------
rev/min: 2380 4760 7140
9520
Programming Offline via PC by WINLOC
online via TERM 5, TERM 24 or
TERM 32
Displays 8 output displays
2 displays for external ProgSelection1
SSI-control display
1 error display External encoder position
Interface RS485 (DICNET ® )
Installation DIN-rail mounting
Type of protection IP24
Dimensions 24 x 79 x 98 (WxHxD)