DEUTSCHMANN AUTOMATION LOCON 7, Инструкция по эксплуатации, Страница: 28 / 50

Programming LOCON 7 and LOCON 9 Deutschmann Automation GmbH & Co. KG
28 Instruction manual LOCON 7, LOCON 9 V. 10.4 24.5.04
7 Programming LOCON 7 and LOCON 9
7.1 Basics
7.1.1 Backup on PC
The possibility of a backup on a PC is also offered. With WINLOC it is possibe to save programs
of LOCON either on harddisk or on a PC’s disk and also to load them back.
7.2 Program structure
The graphs shown on the following two pages should serve the operators, who have experience
in programming cams, as a survey how to program LOCON.
The different states of LOCON are represented by the big boxes; the smaller boxes reflect
actions which are caused by pressing a key (represented by arrows).
Generally the following rules apply:
1) With the help of the -key it can be switched to the next menu-point.
2) With the help of the -key the program process is broken off or is returned to the previous
menu point.
3) By pressing the -key for a longer period it can be switched from a display-mode to an
adequate programming mode.
4) With and the displayed value in the program mode can be changed. With it a three-
stage autorepeat-function is supported, i. e. one key is pressed steadily, the change of the
display follows for a while in one step, then in five steps and in the end in twenty steps.
Therefore a fast change of the display in the whole field is guaranteed.