DEUTSCHMANN AUTOMATION LOCON 7, Инструкция по эксплуатации, Страница: 36 / 50

Programming LOCON 7 and LOCON 9 Deutschmann Automation GmbH & Co. KG
36 Instruction manual LOCON 7, LOCON 9 V. 10.4 24.5.04
After pressing the key (long) in the normal mode the state of the rotational direction is dis-
played.
The following categorization applies:
0 = rotational direction not inverted (state of delivery)
1 = rotational direction inverted
In this state the LEDs "Zero" and "Function" flash together with the LED "Prg.Mode".
Now the state of inversion of the rotational speed can be changed by pressing the key .
If the desired value is adjusted, the displayed value is programmed with the key and a
return to the normal mode takes place.
If the programming should be broken off, the old value can be restored with the key and a
return to the normal mode can take place.