DEUTSCHMANN AUTOMATION LOCON 7, Инструкция по эксплуатации, Страница: 30 / 50

Programming LOCON 7 and LOCON 9 Deutschmann Automation GmbH & Co. KG
30 Instruction manual LOCON 7, LOCON 9 V. 10.4 24.5.04
7.3 Definitions
Active program The program that is processed by LOCON, i. e. this program determines
how the outputs in dependence on the encoder position are set. After
switching on the active program is the one that was processed as active
program when switching off the last time.
Normal mode LOCON is directly in that mode when switching on. Either the encoder posi-
tion or the speed is displayed. The active program is carried out.
Display mode Either the switch-on- or the switch-off-point of the programmed cams is dis-
played. The active program is carried out.
Programming mode The switch-on- or the switch-off-point, which is just to be programmed, is
displayed. At the same time the LED "Prg.Mode" flashes. The active pro-
gram is carried out. Either the active program or any other program can be
programmed.
Blank-cam A "blank-cam" is displayed by three horizontal dashes (“---“). It always
appears, when no cam is programmed at the desired output or if a new cam
can be added in the programming-activity.
Keypush long
Remove automatically
Keypush normal
At the graph are only standardfunctions considered.
All functionkeys are arranged on the right or above.
LEGEND
Display CA
Clear All
Keypush long
Remove automatically
Keypush normal
At the graph are only standardfunctions considered.
All functionkeys are arranged on the right or above.
LEGEND