DETEWE OpenCom 130 Скачать руководство пользователя страница 21

Страница: 21 / 204

Factory Settings on Delivery

Authorisations

■

Connections can be parked.

■

Call protection can be activated, call-waiting protection, announcement pro-
tection and pick-up protection can not be activated.

■

Transmission of one’s own phone number (MSN or system access number) can
be suppressed on a per-call basis.

■

The telephone lock can be activated. The terminal PIN is “0000”.

■

Interception of “malicious” callers is possible if this feature has been ordered
from the network operator.

■

The white list, black list and call filters are not preconfigured and thus not
active. If these lists are configured, they can be activated for the user groups. A
special list with emergency telephone numbers is preset and activated.

■

Call lists on terminals list internal calls, external calls, calls from the door and
calls that the user received while they were telephoning.

■

Function keys can be programmed on system telephones, no keys are locked.

■

The evaluation of connection data by external cost-recording programs is
deactivated.

■

The cost multiplier is set to 100%, i.e. the costs are not multiplied by any factor.
There are no preset basic amounts for the charging of calls.

■

Speed dialling is possible if this has been configured in the OpenCom 100
central telephone book.

■

Keypad dialling can be used.

■

The door opener can be activated from all terminals. Door calls can be for-
warded.

■

Time control is not active as there are no time groups configured.

■

Call diversion for SMS calls in the fixed-line network is not activated.

■

Calls can be marked with a booking number for the purpose of project based
accounting.

Содержание OpenCom 130













































































































































































































Результаты поиска

Содержание OpenCom 130

Отзывы:

Похожие инструкции для OpenCom 130

Бренды по названию

Популярные бренды

DETEWE OpenCom 130, Руководство пользователя

Результаты поиска

Содержание OpenCom 130

Отзывы:

Похожие инструкции для OpenCom 130

Бренды по названию

Популярные бренды