Detcon SmartWireless CXT, Руководство по установке и инструкции оператора

Страница: 49 / 55

Se nti nel C X T
Sentinel CXT Instruction Manual Rev. 1.7 Page 43 of 49
11.2U ti li ti e s
CAUTION
Contact a Detcon representative prior to changing any settings in this section.
Default settings are functional for the majority of applications. Any adjustments
made to other items may cause the controller or various components to not work
properly.
SmartWireless® CXT controller advanced setup is accomplished through the Utilities Menu and consists of
9 menu items:
1. Set RF Silence and RF Sleep
2. Set Low Battery Alarms
3. Set Modbus Address
4. CXT Low Battery Threshold
5. Module update rates
6. DA4 Emulation
7. Set COMM Baud Rates
8. Set Modbus
™
Timeouts
9. Display Settings
N O T E
To access the Utilities Menu, advance to the View TWA and Peak menu. Hold the magnet
over the ENTER marker for 20 seconds without removing it.
11.2.1 SetR FSi le nce a nd R FSleep
The Set RF Silence and RF Sleep menu allows the user to initiate radio silence for a predetermined amount
of time, over the entire network. RF Sleep terminates communication (sleep command) between all of the
wireless radio modules in the network as a power saving feature. A longer sleep time will increase delay
between alarm conditions occurring and the alarms being activated. RF Silence prevents radios from
interfering with other RF devices on site (remote detonators). This feature will stay on until the user turns it
off, the sensors are not monitored and no alarms can be activated.
1. Upon entering this menu, the LCD will display:
R FSIL EN C EA N D SL EEP
R FSIL EN C E: | R FSL EEP :
| ##:##
X X X | SL EEP :X X X
2. Swipe the magnet over the markers of the up or down arrows to move the arrow prompt "
→
" to the
desired location. A swipe over:
 T heEN T ER m arkerforR FS ILEN CEandS L EEP w illtogglethevaluebetw eenO N andO FF.

T he EN T ER m arkerforthe R F S L EEP w illselect the function indicated by the arrow prom pt
"→".

T hem arkersoftheupordow narrow sw illchangethevalue.

T heEN T ER m arkerw illsavetheselectedvalue.

T hesleeptim erhasarangefrom zerotofivem inutesandissetinm inutesandseconds.