8
MFT4X8 man
8
MFT4X8 man
ENGLISH
ENGLISH
ASSEMBLY
ASSEMBLY
STEP 2
STEP 2
DRAWBAR ASSEMBLY
1. Flip the front bed half over so it is upside down.
2.
Position drawbar (5L, 5R) to the trailer front bed (26), fitting the bars into the U slots on the front
cross member.
3. Use L latch (37) to go through the U bracket and lock with R clip after then.
4. Use M10 x 30 (36), M12 x 25 (39) to connect the drawbar end to trailer side rails. Do not tighten the
bolts until all bolts in position.
5. Connecting drawbar T plate (3), drawbar coupler base (4) as shown with M10 x 20 (34)
Item N
o.
Description
Qty.
3
Tow bar T-plate
1
4
Coupler base
1
5
Tow bar
2
34
Hex M10 x 20 bolt & nut (set)
12
Item N
o.
Description
Qty.
36
Hex bolt M10 x 30 & nut (set)
2
37
Hitch pin Ø12 x 75 & R clip
(set)
2
39
Hex bolt M12 x 25 & nut (set)
2
�ig.2
