Derby cycle PEDELEC IMPULSE 2.0 ERGO, Руководство пользователя

Страница: 2 / 34

Contents
1 Safety 4
1.1 General 4
1.2 Statutory requirements 5
1.2.1 Requirements for the rider 5
1.3 Battery 5
1.4 Motor 6
1.5 Adjustments/maintenance/repair 6
1.6 Transportation of the Pedelec 6
1.6.1 The Pedelec and your car 6
1.6.2 The Pedelec on trains 6
1.6.3 The Pedelec on aeroplanes 6
2 Components of the Pedelec 8
3 First steps 9
3.1 Checking the tightening torques 9
3.2 Fitting the pedals 9
3.3 Adjusting the saddle height 9
3.3.1 Clamping bolt 9
3.3.2 Quick-release device 9
4 Quick start 10
4.1 Riding in the ERGO power-assist mode 11
5 Battery 14
5.1 Charging the battery 14
5.1.1 Removing the battery 15
5.1.2 Charging the battery 15
5.1.3 Installing the battery 16
5.2 Battery information system 17
5.2.1 Checking the charge state 17
5.2.2 Checking the capacity 17
5.3 Battery management 18
5.3.1 Sleep mode 18
5.4 Warranty and service life 18
5.5 Storage 19
5.6 Shipping 19
5.7 Disposal 19
6 Charger 19
7 Control unit and display 20
7.1 Control unit 20
7.1.1 Switching on/off 20
7.1.2 Push assist 20
7.1.3
/
buttons 20
7.2 Display 21
7.2.1 Assistance indicator 21
7.2.2 Battery charge state indicator 22
7.2.3 Remaining range indicator 22
7.2.4 Units 22
7.3 Programming and settings 22
7.3.1 Drive data 22
7.3.2 Delete trip data 23
7.3.3 Delete overall data 23
7.3.4 Device settings 23
7.3.4.1 Display 23
7.3.4.2 Drive 24
7.3.4.3 Miscellaneous 24
7.3.5 Personalize 24
7.3.6 Target cost 25
7.3.7 ERGO settings 25
7.3.7.1 Target heart rate 26
7.3.7.2 Warning heart rate 26
8 NuVinci Harmony gears 26
8.1 Automatic mode 27
8.2 Manual mode 27
9 The motor 28
9.1 Operation 28
9.2 Range 28
9.3 Riding your Pedelec efficiently 29
9.4 Warranty and service life 29
10 Troubleshooting 30
11 Cleaning 32
11.1 Battery 32
11.2 Motor 32
11.3 Display 32
11.4 Control unit 32
11.5 Charger 32
12 Technical data 33