Derby cycle PEDELEC IMPULSE 2.0 ERGO, Руководство пользователя

Страница: 10 / 34

10 Original User Manual | Pedelec Impulse 2.0 Ergo
4 Quick start
1. Charge the battery completely before riding for the
first time. Charge temperature: 0°C to 45°C.
Charging the battery
SEAT TUBE BATTERY
2. Remove the cover from the charging socket.
3. Connect the plug of the charger to the battery.
Charging the battery
DOWN TUB E B ATTERY SEAT TUB E BATTERY
4. Plug the charger in at the wall socket.
›
You must charge the battery completely before
using it for the first time. Depending on the
manufacturer of the cells, the batteries will have
a charge state of between 30 and 50%.
›
You can also remove the battery from your
Pedelec and charge it elsewhere. For more
information, refer to
➠
Chapter 5 “Battery” .
5. Once all of the battery LEDs have gone out, the battery
is fully charged. Pull the plug of the charger out of the
charging socket and unplug the charger at the wall
socket.
6. a) Down tube battery: If you removed the battery for
charging, replace it in the holder from the front/above.
At the same time, the key must be in the lock and must
be turned anticlockwise. Press the battery down into
the holder until the locking mechanism engages.
6. b) Seat tube battery: If you removed the battery for
charging, reinsert the battery into the holder on the
Pedelec from the left-hand side. Tilt the battery out-
wards at an angle of roughly 45° as you do so. Swivel
the battery into the upright position until the locking
mechanism engages. Now turn the key clockwise and
remove it. The battery is now locked in place.
Installing the battery
DOWN TUBE BATT ERY SEAT TUBE BATTE RY
7. Now turn the key clockwise and remove it. The battery
is now locked in place.
Locking the battery
DOWN TUBE BATTE RY SEAT TUBE BATTERY
8. Make sure that the battery is securely positioned and
that the key is no longer in the lock.
9. Press the button on the control unit to switch on the
drive system.
10. a) Pedelec without backpedal function: After the wel-
come screen, the display shows the power-assist mode
that was last set. Press the / buttons to select
the level of assistance:
ECO (low), SPORT (medium),
POWER (high), ERGO (heart-rate-controlled) or no as-
sistance. Pressing once changes the level of assistance
by one level. This works both ways, depending on
which of the buttons you press.