Dentsply Sirona Sim Multi Bench, Руководство по эксплуатации

Страница: 61 / 100

Dentsply Sirona
Operating Instructions Simulation Unit Sim Multi Bench 4 Operation
4.4 Dentist element
66 82 384 D3684
D3684.201.01.02.02 07.2019
61
Changing the intensity
1 2
Setup
3
➢ Press and hold the favorite key 1 or 3 (> 1 s).
Ä
The intensity is increased or reduced.
S
0
The intensity can also be increased or reduced by moving the 4-way
switch plate of the C+ electronic foot control up or down.
IMPORTANT
Increments
The size of the increments depends on the intensity range set.
From 1 to 5% = 1% increments
From 5 to 50% = 5% increments
From 50 to 100% = 10% increments
Saving intensity
ü The desired intensity is set.
ü
Via the C+ electronic foot control: The spray is switched on or off
(will be saved).
2
Setup
1. Press and hold the favorite key 2 / Setup (> 2 s).
Ä The intensity flashes on the SIM display of the dentist element.
1 2
Setup
3
2.
Press the favorite key 1, 2, or 3.
Ä An acoustic signal sounds. The intensity set and, if applicable,
activation of spray will be saved on the favorite key.
A/B
While the intensity is flashing on the SIM display of the dentist element,
saving on a favorite key can be canceled by pressing the
Counterclockwise rotation / user profile key.
Switching endodontics mode on
For reasons of safety, e.g. to prevent needles from breaking, the
intensity is limited in Endo mode.
IMPORTANT
Intensities in endodontics mode
The intensity can be set from 1e to 5e. Please note that the intensity
values of 1e to 5e (endodontics mode) do not correspond with the
values of 1 to 5 in the scaler mode (ultrasound mode).
Always use the endo mode for endodontics!
ü
The SiroSonic L scaler is removed.
ü
The set ultrasonic intensity (ultrasonic mode) is displayed on the
SIM display of the dentist element.