Dentsply Sirona Sim Multi Bench, Руководство по эксплуатации

Страница: 57 / 100

Dentsply Sirona
Operating Instructions Simulation Unit Sim Multi Bench 4 Operation
4.4 Dentist element
66 82 384 D3684
D3684.201.01.02.02 07.2019
57
Accessing saved torque
ü The electric motor is removed from its holder with torque control
switched on.
ü
The set torque is displayed on the SIM display of the dentist
element.
1 2
Setup
3
➢ Press one of the favorite keys briefly (<1 s).
Ä
The torque saved on the favorite key is displayed on the SIM
display of the dentist element in Ncm (Newton centimeters).
S
0
By moving the 4-way switch plate of the C+ electronic foot control to the
right, the torque settings of the favorite keys can be accessed
consecutively.
Changing torque
1 2
Setup
3
➢ Set the desired torque for the contra-angle handpiece. Press and
hold the favorite keys 1 or 3 (> 1 s).
Ä
The torque is increased or reduced.
S
0
The torque can also be increased or reduced by moving the 4-way
switch plate of the C+ electronic foot control up or down.
Saving torque
ü
The desired torque is set.
2
Setup
1. Press and hold the 2 / Setup favorite key (> 2 s).
Ä The torque flashes on the SIM display of the dentist element.
1 2
Setup
3
2. Press the favorite key 1, 2, or 3.
Ä
An acoustic signal sounds. The torque setting is saved on the
favorite key.
A/B
While the torque is flashing on the SIM display of the dentist element,
saving on a favorite key can be canceled by pressing the
Counterclockwise rotation / User profile key.