65 67 510 D3642
10
D3642
.
201.01.03
.
02 01.2018
2 Safety information
Dentsply Sirona
2.1 Information on the unit
Operating Instructions LEDview Plus
2
Safety information
2.1
Information on the unit
Accompanying documents
This symbol can be found on the rating plates on the units.
Meaning: Observe the Operating Instructions when operating the unit.
This symbol can be found on the rating plates on the units.
Meaning: The accompanying documents are available on the
manufacturer's homepage.
2.2
Care, cleaning, and disinfecting agents
Unsuitable care and cleaning agents or disinfectants may corrode the
surface of the unit or impair its functioning.
Therefore, use only care and cleaning agents and disinfectants which
have been approved by the manufacturer. For more information, see the
chapter "Care, cleaning, and disinfecting agents".
2.3
Trouble-free operation
Use of this system is permissible only if it works properly without
malfunctions. If trouble-free operation cannot be ensured, the unit must
be taken out of service, checked by authorized technicians for
malfunctions and, if necessary, repaired.
2.4
Blinding
2.5
Composite mode
WARNING
Due to the extreme brightness of the LED technology employed,
directing the light beam into the patient's or user's eyes should be
avoided! Briefly looking into the light beam is harmless.
CAUTION
To prevent premature curing when composite materials are used,
always operate the light in composite mode under these circumstances.
The irradiance based on the spectral sensitivity of the camphorquinone
is < 3 W/m² in accordance with ISO 9680:2014. Despite the reduction in
irradiance, modern high-sensitivity composite materials in particular can
cure prematurely as a result of other light sources, e.g. cap lamps,
ceiling lamps, daylight, etc. The application procedure must, therefore,
be checked on an individual basis.
