DAEnetIP3
User Manual
-
96
-
19.
Appendix 2. Connecting the controller to LAN/WLAN/WAN
19.1.
UTP cable connection with PC for first time
1.
Connect DAEnetIP3 RJ45 port with UTP (doesn‟t matter crossover or
straight) cable.
2. Connect the PC with the other side of the UTP cable.
3. Change the IP of the PC. It may be for example 192.168.0.1. (DAEnetIP3
is shipped with 192.168.0.100)
4. Supply DAEnetIP3 with power supply 12 VDC or 24VDC (the middle pin of
DAEnetIP3 power jack is +12VDC or +24VDC). The power led (with red
color) must be on.
5. Open your browser (IE, Firefox, Opera) and type 192.168.0.100 in the
address bar.
6. Use
admin
for password.
19.2.
UTP cable connection with router
1.
Connect DAEnetIP3 RJ45 port with UTP (doesn‟t matter crossover or
straight) cable.
2. Connect PC with the other side of the UTP cable.
3. Remember or write down the IP of the PC (for example we accept it is
192.168.1.2).
4. Change the IP of the PC. It may be for example 192.168.0.1. (DAEnetIP3
is shipped with 192.168.0.100).
5. Supply DAEnetIP3 with power supply 12 VDC or 24VDC (the middle pin of
DAEnetIP3 power jack is +12VDC or +24VDC). The power led (with red
color) must be on.
6. Open your browser (IE, Firefox, Opera) and type 192.168.0.100 in the
address bar.
7. Use
admin
for password.
8. Open admin settings.
9. Change the Eth IP address of DAEnetIP3. Make it to be in one network
with your router and PC. For example if your router is with IP 192.168.1.1
and PC with 192.168.1.2, make DAEnetIP3 with 192.168.1.100. Eth mask
must be 255.255.255.0 and Eth gateway 192.168.1.1 (router IP)
10. Unplug the power supply.
11. Disconnect the UTP cable from PC and connect it to the router.
12. Supply again the DAEnetIP3
13. Give back the old IP of the PC (192.168.1.2)
14. Open browser and type 192.168.1.100.
15. Now you may access the DAEnetIP3 controller with router via router from
PC.