121764_BA_INT_010 Fasswender SV
Page 10 of 19 pages
Issued 09/2016
115286, 147724
6. Maintenance and servicing
-
Check safety chain for damage and firm hold
-
Check tension belt for damage.
-
Transmission is supplied with lifelong oil fill and so is maintenance-free
-
Have regular inspections carried out at maximum intervals of one year by an expert from the operators.
-
In the event of damage and particular incidents that could influence the carrying capacity as well as after
repairs an extraordinary testing by a qualified person is to be carried out.
-
Before the visual and function control under certain circumstances cleaning of the handling system may
be necessary. This applies in particular when full of substances, e.g. dyes or salts, from its previous use.
-
The scope of the inspection in case of visual defects and malfunctions extends to breaks, deformation,
incipient cracks, damage, wear and tear, corrosion damage and malfunctions of the handling system
-
As evidence that the inspections have been carried out the operator must draw up and keep a checklist.
-
In case of visible deformation, obvious damage, major wear and tear of the screws and screw guides the
handling system must not be used further.
7. Declaration of conformity
EC Declaration of Conformity
Herewith we, the DENIOS AG, Dehmer Straße 58-66, D 32549 Bad Oeynhausen, declare that the product
Drum turner SV /SV-EX
complies with following guidelines:
EC Directives
Machinery directive 2006/42/EC
Harmonised standards applied
EN 13155
EN 349
EN 12100 -1,-2
Person responsible for documentation
DENIOS AG, 08.09.2016
Susanne Wienecke
Benedikt Boucke
Technical Design
- Board of governors -
