DencoHappel MultiMAXX HD Скачать руководство пользователя | Manualshive

Страница: 19 / 76

background image

Multi

MAXX

HD

Transportation and Storage

PR-2007-0350-GB • Subject to modifications • R2-04/2016

19

6

Transportation and Storage

6.1

Delivery

When transporting and storing the unit the manuafacturer’s instructions must be
adhered to (see specification on the packaging).

•

After the Multi

MAXX

HD is delivered, check that the delivery is correct according to

the delivery note, and also check for completenes (see “Technical Description and
Scope of Supply” on page 5).

•

It is necessary to take photographs of all visible transit damage.

6.2

Transport

•

Only use lifting gear with sufficient load carrying capacity.

•

Ropes/chains should not be knotted and/or be exposed to sharp edges.

•

Never use damaged lifting equipment.

•

Pay attention to equal weight distribution.

– For your own safety wear gloves and safety footwear when transporting the unit.

6.3

Storage

Protect the Multi

MAXX

HD unit from humidity and dirt. Store the unit on premises of

class IE12, in accordance with the requirements EN 60 721-3-1.

Permitted storage conditions / permitted air condition for units which have not yet been installed

Air temperature: -25 °C to +40 °C

Air humidity:

up to 85 % (relative humidity with no condensation)

NOTE!

Missing parts or damage in transit can only be claimed with the transport insurance
if the damage has been confirmed by the carrier.

NOTE!

We recommend that you transport or store your Multi

MAXX

HD in its original pack-

aging. Remove the original packaging only before installation. The packaging must
be disposed of in accordance with the relevant regulations and must be kept out of
reach of children due to potential asscociated risks. Protect the unit from the build-
up of dust and dirt. Be aware of damage during storage until the unit is ready for com-
missioning.

DANGER DUE TO OVERHEAD LOADS.

Never stand beneath suspended loads.

PERSONAL INJURY!

Do not use damaged transport devices.
Use a fork lift truck only if the unit is located on a pallet.

DAMAGE TO THE UNIT!

When transporting / moving the unit never use heat exchanger connections and
spigots as this may result in damage to the Multi

MAXX

HD.

«
...
17
18
19
20
21
...
»

Содержание MultiMAXX HD













































































Отзывы:

Нет отзывов

Похожие инструкции для MultiMAXX HD

Бренд: Abus Страницы: 108

Powersaver Dual Flexi

Бренд: Sangamo Страницы: 2

Бренд: O'Clair Страницы: 138

Бренд: Calorex Страницы: 2

Бренд: Noritz Страницы: 26

Бренд: nedis Страницы: 7

Бренд: Eco Heat Страницы: 2

Omni 230 Type B

Бренд: Toyotomi Страницы: 18

PV CERA PLUS 500

Бренд: ProVida Страницы: 5

Zoneline AZ91H18E E Series

Бренд: GE Страницы: 78

Бренд: Ravanson Страницы: 22

Бренд: Singer Страницы: 12

Бренд: LevelOne Страницы: 11

Бренд: Nibe Страницы: 16

Бренд: SPXFLOW Страницы: 35

Бренд: Perel Страницы: 17

Бренд: Climate Caddy Страницы: 24

Бренд: STIEBEL ELTRON Страницы: 58

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды