DencoHappel MultiMAXX HD Скачать руководство пользователя

Страница: 8 / 76

Safety and User Information

Multi

MAXX

PR-2007-0350-GB • Subject to modifications • R2-04/2016

4.4

Labelling of safety instructions

PROTECTIVE SHOES!

This symbol indicated that you must wear protective shoes.

PROTECTIVE GLOVES!

This symbol indicated that you must wear protective gloves.

PERSONAL INJURY!

Here you will find special information as well as rules as restrictions for preventing
personal injury.

ELECTRICAL HAZARD!

This symbol indicates that there is a risk of electrical shock that can result in personal
injury including death and material damage.

HOT SURFACE HAZARD!

Here you can find special information as well as rules and restrictions for the
prevention of personal injuries due to hot surfaces.

DANGER – SHARP CUTTING EDGES!

Here you will find special information as well as rules and restrictions for the
prevention of personal injuries due to cutting on thin metal fins.

HIGH PRESSURE HAZARD.

Here you can find special information as well as rules and restrictions for the
prevention of personal injuries due to high pressure.

DANGER OF OVERHEAD LOADS!

This symbol indicates a hazardous location with a risk of personal injury
including death and material damage.

DANGER OF INFLAMMABLE MATERIALS

Here you can find special information as well as rules and restrictions for the
prevention of personal damage due to risk of fire.

ENVIRONMENTAL DAMAGE.

This symbol warns you against damage to the environment and turns your attention
you to all existing national environmental protection regulations.

DAMAGE TO THE UNIT!

Here you will find special information, rules and restrictions regarding the
prevention of damage to the Multi

MAXX

HD.

DANGER OF DAMAGE DUE TO STATIC DISCHARGE!

While carrying out connections or adjustments on the Multi

MAXX

make sure that you

discharge yourself statically before touchning PC boards and electrical
components.

Содержание MultiMAXX HD













































































Результаты поиска

Содержание MultiMAXX HD

Отзывы:

Похожие инструкции для MultiMAXX HD

Бренды по названию

Популярные бренды

DencoHappel MultiMAXX HD, Руководство по эксплуатации

Результаты поиска

Содержание MultiMAXX HD

Отзывы:

Похожие инструкции для MultiMAXX HD

Бренды по названию

Популярные бренды