DEMAG DC-Com 1, Руководство по эксплуатации

Страница: 51 / 116

Fig. 29
7th step:
Press the "Lifting" button to select the currently
displayed parameter. The value selection
menu for the parameter opens at the same
time. The currently set values are symbolically
displayed with the characters "A.", "b.", "C."
etc.
For the meaning of the characters, see
 "Meaning of the parameters", Page 49.
8th step:
To set a different value, press the "Lowering"
button until the required value is shown in the
display.
9th step:
The value is again selected by using the "Lift‐
ing" button, the system then also returns to pa‐
rameter selection mode.
7-segment display: A. b. C. 7-segment display: 7-segment display:
Tab. 35
Fig. 30
10th step:
The unit returns to normal operating mode when the "Emergency stop" button is pressed.
All changes are first saved.
7-segment display:
Tab. 36
214
80
2 44/291
113
51