2.5
Responsibility of the owner
Information on safety at work refers to the regulations of the European Union that apply when the machine is
manufactured. The owner is obliged to ensure that the specified industrial safety measures comply with the latest
rules and regulations and to observe new regulations during the entire service life of the machine. Local industrial
safety legislation and regional regulations and codes of practice applicable at the site of operation of the machine
must be observed outside the European Union.
General safety, accident prevention and environmental protection regulations that apply where the machine is in
operation must be observed and complied with in addition to the safety instructions contained in these operating
instructions.
The owner and any personnel authorised by him are responsible for correct operation of the machine and for
clearly defining responsibilities for installation, operation, maintenance and cleaning. The operating instructions
must be followed in full and without any limitations.
Special local conditions or applications may lead to situations which are not considered in these operating instruc‐
tions. In such cases, the required safety measures must be defined and implemented by the owner. Necessary
measures may also relate, for example, to the handling of hazardous materials or tools and the provision/wearing
of personal protection equipment. The operating instructions must, if required, be supplemented by the owner with
instructions relating to organisation of work, working procedures, authorised personnel, supervising and reporting
obligations, etc. For further information, see
"Safety instructions for operation", Page 55.
Furthermore, the owner must ensure that
● any further working and safety instructions resulting from the hazard assessment of the machine workplaces
are specified in operating procedures.
● personnel who work with or on the machine are provided with appropriate first-aid equipment. Personnel must
be trained in the use of the first-aid equipment.
● the operating instructions are always kept available in the immediate vicinity of the machine for installation, op‐
erating, maintenance and cleaning personnel.
● personnel are trained in accordance with the work to be performed.
● the machine is only operated when in safe and proper working order.
● the safety devices are always kept freely accessible and are checked regularly.
● national regulations for the use of cranes and lifting appliances are observed.
● any specified regular checks and inspections are carried out on time and are documented.
The owner is urged to develop procedures and guidelines for any malfunctions, to instruct users and to affix these
instructions at a suitable place where they can be easily seen.
2.6
Operating personnel requirements
Only authorised and trained personnel may work on the installation. The personnel must have received instruction
on the installation functions and any hazards that may occur.
Every individual given the task of working on or with the installation must have read and understood the instruc‐
tions before any work starts.
Persons under the influence of drugs, alcohol or medicines which affect their reactions must not work on or with
the installation.
Age and job-specific regulations relevant at the place where the installation is operated must be observed for the
selection of any personnel.
Personnel are obliged to report to the owner without delay any changes to the installation that impair safety.
For independent operation (operator) or maintenance (trained maintenance fitter) of the installation, the owner
may only employ persons
● who are at least 18 years of age,
● who are mentally and physically suitable,
● who have been instructed in the operation and maintenance of the installation and who have proven their quali‐
fication to the owner in this respect.
14
214
80
2 44/291
113
Содержание DC-Com 1
