RDM Network Scanner User Guide
Network Scanner Dashboard
©2021 RDM Corporation
Page 41
Restoring factory default settings
The RDM network series scanners have a reset button in the back-right corner of the scanner. The reset
button restores the dashboard settings to their factory default. The reset button does not affect the
firmware installed on the scanner.
To
restore the scanner’s
default settings:
1.
Unplug the scanner.
2.
Use a pin to hold down the reset button and plug in
the scanner.
The scanner starts with the factory default
dashboard settings.
After you restore the scanner’s default settings
:
•
If you made changes to the dashboard settings to allow the scanner to work on your
network, you will need to make these changes again.
•
The password used to access the Configuration, Administration, and Test Scanner pages
is reset to its default (rdm123)
