RDM Network Scanner User Guide
Setting up your scanner
©2021 RDM Corporation
Page 22
To connect:
Plug the USB cable (included) into the square USB port on the back of the scanner (marked in red below)
and plug the other end into a USB port on your computer
Option 2. Ethernet: Scanner and computer have separate connections to the network
In this configuration, you connect the scanner to the network. Your computer retains whatever network
connection it had previously.
Considerations:
•
All workstations on the same network can connect to the scanner.
•
Requires a dedicated Ethernet connection for the scanner.
•
Can be used by network scanners with at least one Ethernet port.
To connect:
1.
Plug an Ethernet cable into the Ethernet port on the back of the scanner (marked in red below)
and plug the other end into an Ethernet network jack. (Plug Ethernet cable into one of the two
ports on EC9600i AF models).
