RDM Network Scanner User Guide
Operating the scanner
©2021 RDM Corporation
Page 24
Operating the scanner
Caution:
Do not open the cover or try to access the inside of the scanner while it scans a document.
Preparing documents
To reduce the possibility of errors and damage to the unit:
•
Remove all folds and creases in the document.
•
Remove any paper clips and staples from the document.
•
Make sure that documents are not stuck together.
•
Make sure that documents are dry.
Feeding documents
The scanner unit is ready to accept documents when the LED is flashing green. Insert the documents
either one at a time with single-feed (SF) models, or in a batch with auto-feed (AF) models.
Make sure that you place the documents into the feeder with the MICR line at the bottom and facing
towards the outside of the scanner.
Caution:
Adjust the exit extension or the pocket stop to fit the documents that you are scanning.
Documents can be damaged or jam in the scanner if the exit extension or pocket stop is not fitted to the
documents.
Single-feed (SF) models
1.
Start the scanning process. For example, click Scan on your
payment application.
2.
Hand-feed a document into the feeder until the scanner
pulls the document through the transport. The document
is scanned and processed.
3.
Repeat steps 1 and 2 until you have scanned all your
documents.
Feeding Checks on an RDM Single Feed Check Scanner
Alternatively visit:
https://www.youtube.com/user/RDMCorporation/playlists
