RDM Network Scanner User Guide
Operating the scanner
©2021 RDM Corporation
Page 26
Understanding light signals
The
scanner’s
status is shown through a single, multistate LED (light-emitting diode), which is the light
on the top, front, right-hand side of the unit. The tables below describe typical status signals and their
meanings for the EC9600i and EC9700i series scanners.
Signals in a typical document processing cycle
1.
The LED is Green (Solid): The unit is idle.
2.
The LED is Green (Flashing): The scanner is waiting for a document to be inserted for scanning.
3.
The LED is Green/Red (Flashing): The scanning operation is in progress.
4.
The LED is Green (Solid): The scanning operation is complete. The scanner has returned to its
idle state.
EC9600i network scanner signals
Status
LED Sequence
Notes
Booting
Solid red (max 30 seconds)
The scanner is starting.
Booting
Long-red and two short-green
flashing cycle
Unconnected
Long-green and short-red flashing
cycle
The scanner does not detect an
Ethernet or USB connection.
Idle
Long-green and short-green
flashing cycle
The scanner is ready and idle.
Note: The idle signal depends on your
payment application.
Idle
Solid green
Busy
Green flashing
The scanner is waiting for the user to
insert a document into the feeder.
Busy
Solid green
The scanner is waiting for the user to
take action on the PC application.
Busy
Green and red flashing cycle
The scanner is processing the
documents. Wait for the scanner to
finish.
Error
Red flashing
An error occurred while the scanner was
processing the document. Check your
PC application for instructions or refer
to your local procedures. If you need
more help, contact your distributor
(reseller).
