Delta HD2114.0, Руководство пользователя

Страница: 20 / 40

- - 20
The following table reports the indications provided by the instrument as they appear on the display,
together with their description.
Display indication Explanation
### BAR ABS probe ###bar absolute
### BAR DIFF probe ###bar differential compared to atmosphere
### BAR GAUG probe ###bar relative
### BAR SG probe ###bar relative compared to 1 bar
### mBAR ABS probe ###mbar absolute
### mBAR DIFF probe ###mbar differential
### mBAR GAUG probe ###mbar relative
>>>_LOG_DUMP_or_ERAS transfer or erase data
>>>_PRBE_TYPE type of probe connected
BATT TOO LOW - CHNG NOW battery discharged - replace it immediately
BAUDRATE >>> baud rate value
COMM STOP printing complete
COMM STRT printing started
DAY_ day
DUMP_END data transfer complete
DUMP_In_PROG >>> data transfer in progress
ERR error
FUNC CLR max, min and average values clearing
FUNC CLRD max, min and average values cleared
HOUR hour
LOG In PROG logging in progress
LOG MEM FULL memory full
LOG_CLRD memory data cleared
LOG_STOP logging complete
LOG_STRT logging started
MIN >>> USE_UNIT_TO_ZERO SEC minutes >>> use the UNIT key to reset the seconds
MNTH month
NEW_PROB_DET new probe detected
OVER maximum limit of temperature or pressure exceeded
PLS_EXIT >>> FUNC RES_FOR_FACT ONLY
please exit using ESC >>> function reserved to factory
calibration
NO_PRBE_SER_NUM the serial number of the probe connected to the input is absent
PRBE_SER #### #### serial number #### #### of the probe connected to the input
PRES_REL_TO_ZERO ENTR_TO_MENU press REL to reset differential probe or ENTER to access menu
PRNT AND LOG INTV printing and logging intervals
PRNT INTV >>> printing interval
PROB COMM LOST lost communication with SICRAM module
PROB ERR error - unexpected probe
SLP_MODE_LOG turning off during recording mode
SYS ERR # program error number #
YEAR year