- -
5
HD2114.0 - HD2134.0 - HD2164.0 - HD2114B.0
1.
Input, 8-pole DIN45326 connector. It is possible to connect: a PP471 SICRAM module, a
Pt100 temperature probe fitted with SICRAM module, a direct 4-wire Pt100 temperature probe,
a 2-wire Pt1000 probe or a 2-wire Ni1000 probe.
2.
Positive input (+) into the internal pressure sensor. Quick coupling Ø 5mm
3.
Battery symbol: displays the battery charge level.
4.
Function indicators.
5.
Secondary display line.
6.
HOLD/
key: freezes the measurement during normal operation; in the menu, increases the
current value.
7.
FUNC/ENTER
key: during normal operation displays the maximum (MAX), the minimum
(MIN) and the average (AVG) of current measurements; in the menu, confirms the current
selection.
8.
REL/
key: enables the relative measurement (displays the difference between the current
value and the logged value when the key is pressed); in the menu, decreases the current value.
9.
PEAK
key: starts and ends the peak measurement.
10.
MENU
key: allows access to and exit from the menu.
11.
°C/°F-ESC
key: changes the unit of measurement for temperature from degrees Celsius to
Fahrenheit; in the menu, cancels the operation in progress without making changes.
12.
UNIT
key: selects the unit of measurement for the pressure.
13.
ON-OFF/AUTO-OFF
key: turns the instrument on and off; when pressed together with the
HOLD key, disables the automatic turn off.
14.
Peak, MAX, MIN and AVG symbols.
15.
Main display line.
16.
Multiplication factor -3, 3 or 6: the apex, if present, indicates that the displayed measurement
must be divided by 1000 (apex "-3"), multiplied by 1000 (apex "3") or by 1,000,000 (apex "6").
17.
Line for symbols and comments.
18.
Negative input (-) into the internal pressure sensor. Quick coupling Ø 5mm This input is not
present in the HD2114B.0 model.
