Delta DPS-500K, Руководство пользователя

Страница: 74 / 152

6 - 6
Ultron DPS Series
4
Remove the two panels shown in Figure 2-11 and follow 5.4 Wiring to perform wiring.
After wiring, reinstall the two panels.
5
To prevent possible damage from rodents, please take the provided six rodent shields
(including 22 M4 screws) out of the accessory package and install them on the UPS.
The provided rodent shields have four types, A, B, C and D. Each of type A and type B
has two pieces, and each of type C and type D has one piece.
1. Follow Figure 6-4 to install a rodent shield A and a rodent shield B at the front
bottom of the UPS.
T
S
R
N
UPS OUTPUT
N N
240VDC 240VDC
BATTERY INPU
T
T
S
R
N
AC INPUT
R
S
T
BYPASS INPUT
OUTPUT SWITCH
MANUAL BYPASS
SWITCH
BYPASS SWITCH
INPUT SWITCH
Isolate Uninterru
ptible Power Sy stem (UPS) Then check f or Hazardous Vo
ltage betwe en all terminals includ ing the protective earth See installation ins
tructions before connecting to the
supply
Apparatet er egnet fo r tilkopling til et IT
forsyningsnett
RISK OF VOL
TAGE BACKFEED BEFORE WORKING O N THIS CIRCUI
T
(Front View)
M4
Screw
Rodent Shield A
(M4 Screw x 4) Rodent Shield B
(M4 Screw x 4)
(Figure 6-4: Install the Rodent Shields A & B at the Front of the UPS)
2. Follow Figure 6-5 to install the other rodent shield A and the other rodent shield B
at the rear bottom of the UPS.
(Figure 6-5: Install the Rodent Shields A & B at the Rear of the UPS)
(Rear View)
M4
Screw
Rodent Shield A
(M4 Screw x 4) Rodent Shield B
(M4 Screw x 4)