Delta 100kW PCS, Руководство по установке

Страница: 29 / 69

Installation
Installation Manual 25
Forklift Installation
1. Unpack the 100kW PCS, see “Unpacking the Unit” on page 12.
2. Using the forklift to move the 100kW PCS.
Removing the 100kW PCS from left/right side:
a. Remove the hexagonal nuts and washers securing cabinet to the pallet.
Figure 23. Releasing a PCS from a Pallet
CAUTION!
T
O MOVE THE
100
K
W PCS,
USE A FORKLIFT THAT HAS AN APPROPRIATELY RATED LIFT CAPACITY
AND A
915
CM
(36-
INCH
)
FORK SPAN
.
CAUTION!
T
HE ENCLOSURE MUST BE LIFTED FROM THE BOTTOM
. T
HE ENCLOSURE MUST BE SUPPORTED ON
ALL FOUR SIDES WHEN LIFTING
. P
RECAUTIONS MUST BE TAKEN TO AVOID TIPPING OF THE
ENCLOSURE FRONT TO BACK AND SIDE TO SIDE DURING LIFTING BECAUSE THE CENTER OF GRAVITY
OF THE ENCLOSURE IS NOT THE CENTER OF THE ENCLOSURE
.
!
!
ON
OFF
STANDB
Y
RUN
FAULT
ON
AC DI
SCONN
ECT
OFF
ON
DC DI
SCONNE
CT
OFF