Delta OHM HD37AB1347, Руководство пользователя

Страница: 24 / 68

- - 24
4.3.1 The Baud Rate
The Baud Rate indicates the speed used for the serial communication with the PC.
To set the Baud Rate , proceed as follows:
1. Use the arrows ▲▼ to select the item;
2. Press ENTER : You will get the following message:
COMMUNICATION MENU
SERIAL
SET BAUDRATE
Baud Rate: 38,400
▲▼
set
<ESC> exit
<ENTER> confirm
3. Use the arrows ▼▲ to set the value;
4. Press ENTER to confirm and return to the previous page, or press ESC to cancel the change and
exit the menu item;
5. Press ESC over and over to exit from the submenus;
6. Press MENU to exit immediately from the main menu.
WARNING: The communication between instrument and PC (or serial port printer) only
works if the instrument and PC baud rates are the same
. If the USB connection is used, this
parameter value is automatically set.
NOTE: When setting the baud-rate, check the printer speed.
4.3.2 Print Interval
To set the Print Interval , proceed as follows:
1. Use the arrows ▲▼ to select the item;
2. Press ENTER : You will get the following message:
COMMUNICATION MENU
SERIAL
PRINT INTERVAL
h:mm:ss (1h max)
0:00:00
▼▲
set
<ESC> exit
<ENTER> confirm
3. Use the arrows ▼▲ to set the value;
4. Press ENTER to confirm and return to the previous page, or press ESC to cancel the change and
exit the menu item;
5. Press ESC over and over to exit from the submenus;
6. Press MENU to exit immediately from the main menu.
The print interval can be set from 0 seconds to one hour:
0 s - 15 s - 30 s - 1 min. - 2 min. - 5 min. - 15 min. - 20 min. - 30 min. - 1 hour.