Delta OHM HD37AB1347, Руководство пользователя

Страница: 15 / 68

- - 15
To change the ID , press ENTER . Use the ◄► arrows to select the item, and edit it with the ▲▼
arrows. Proceed with the other items, and finally confirm with ENTER .
By selecting Info Probes , the following information on the probes connected to the inputs will be
displayed:
INFO PROBES
Input 1
Type= CO2-CO Fw.V0R0
Cal = 2010/02/10
SN = 10010000
Input 2
Type= Hot wire
Cal = 2010/02/10
SN = 10010001
INFO PROBES:
Description of the probe connected to input 1, Indoor Air Quality.
Calibration date of the probe connected to input 1, Indoor Air Quality.
Serial number of the probe connected to input 1, Indoor Air Quality.
Description of the probe connected to input 2, Temp – Air Velocity.
Calibration date of the probe connected to input 2, Temp – Air Velocity.
Serial number of the probe connected to input 2, Temp – Air Velocity.
Press
ESC to return to the main menu. Press MENU to exit the menu.
Time/Date allows setting the date and time that will be shown at the top of the display.
To access the Time/Date submenu, proceed as follows:
1. Use the arrows ▲▼ to select Time/Date ;
2. Press ENTER ;
3. You will get the following message
TIME / DATE
year/mm/dd hh:mm
2010/02/10 08:00:00
set 00 seconds!
◄►
select
▲▼
set
<ENTER> confirm
4. Use the arrows ◄► to select the data to be set (year/month/day and hour:minutes);
5. Once selected, the data will start blinking;
6. Use the arrows ▼▲ to enter the correct value;
7. Press ENTER to confirm and return to the main menu;
8. Or press ESC to return to the menu without making any change;
9. Press MENU to exit immediately from the main menu.
NOTE : In regard to the time, you can set hours and minutes. The seconds are always set to 00 (set
00 seconds!).