Delta OHM HD37AB1347, Руководство пользователя

Страница: 13 / 68

- - 13
3.1.4 Instrument Setup
In order to set the instrument, you have to open the main menu by pressing MENU . See chapter 4
for further details.
3.1.5 Start of a new logging session
Press MEM to start a Logging session: This key starts and stops the logging of a data block to be
saved in the instrument’s internal memory. The data logging frequency is set in the “Log
Frequency” menu parameter. The data logged between a start and subsequent stop represent a
measurement block.
When the logging function is on, the LOG indication and the logging session number are
displayed; a beep is issued each time a logging occurs.
To end the logging, press
MEM again.
The instrument can turn off during logging between one capture and the next: The function is
controlled by the
AutoPowerOff parameter. When the logging interval is less than 5 minutes, the
logging instrument remains on; with an interval of at least 5 minutes, it turns off between one
capture and the next.