Delta OHM HD37AB1347, Руководство пользователя

Страница: 23 / 68

- - 23
Log lasting (time set for recording)
It represents the recording duration: After this set time, the recording is ended. The recording can be
stopped earlier by pressing
MEM .
To disable this function, set the time to 0:00:00. In this case the recording ends by pressing MEM or
when the memory is full.
LOGGING MENU
LOG LASTING
h:mm:ss (1h max)
00:00:00
With setting:
00:00:00 Log stop
with key MEM
▲▼
set
<ESC> exit
Use the arrows to change the set time; the maximum allowed value is 1 hour.
Confirm with
ENTER .
Press ESC to exit from this menu level without making changes.
Press MENU to exit immediately from the main menu.
4.3 S
ERIAL
M
ENU
(S
ERIAL
C
OMMUNICATION
)
The Serial submenu allows setting the data transfer speed via serial port ( Baud Rate ) and the record
printing interval ( Print Interval ).
The LOG sessions can be downloaded on a PC, through the serial RS232 or USB connection.
In case of serial connection, the transfer speed can be set by the user (see next par.) but it can not be
higher than 38400 bps.
In case of USB connection, the transfer speed is fixed at 460800 bps.
After downloading the data on the PC, using the dedicated software, they will be processed by this
software for graphic display.
The instrument can be connected directly to a
HD40.1 printer .
To access the Serial submenu, proceed as follows:
1. Press MENU on the instrument;
2. Use the arrows ▲▼ to select Serial ;
3. Press ENTER ;
4. You will get the Serial submenu.
COMMUNICATION MENU
SERIAL
1) Baudrate
2) Print Interval
▲▼
select
<ESC> exit/cancel
<ENTER> confirm