Delta OHM HD35AP series, Руководство по эксплуатации

Страница: 8 / 146

HD35
- 8 -
V1.12
1. I
NSTALLING
HD35AP-S
SOFTWARE
Download the HD35AP-S software from the Delta OHM website. Install both HD35AP-S soft-
ware and MySQL Data Base Management System (included in the package of HD35AP-S soft-
ware) in your PC. Concerning the installation of MySQL, thoroughly follow the installation
guide contained in the downloaded file.
2. C
ONNECTING THE BASE UNIT BATTERY
(not for HD35APD, HD35APR and HD35AP…GMT)
For shipments by aircraft, the battery of the devices must be disconnected.
1. Unscrew the 4 front screws of the housing and remove the back cover.
2. Attach the battery connector to the electronic board, paying attention to the correct po-
larity. The connector is equipped with a polarization key that prevents the possibility of a
wrong insertion of the connector.
Fig. 3.2: battery in the devices in housing for internal use
3. Close the housing by fixing the 4 front screws.
•
Factory-configured system: first connect the battery of the base unit and check the
clock setting. Only after this operation, connect the battery of the data loggers, so that the
clock can be synchronized with the updated clock of the base unit at startup.
•
Not configured system: at startup, data loggers don’t synchronize the clock with that of the
base unit, consequently it is not important to power the base unit as first.
3. C
ONNECTING
HD35AP…
BASE UNIT TO YOUR
PC
The HD35AP... base unit can be connected to the USB port of a PC through the CP31 cable
(directly with USB A-type connector for HD35APD…). In this connection mode, the base unit is
powered through the USB port of the PC.
Fig. 3.3: connecting the base unit to your PC
The USB connection doesn’t require the installation of drivers: when the base unit is connected
to the PC, Windows® operating system automatically recognizes the unit as an HID (Human In-
terface Device) device and uses the drivers already included in the operating system.
Battery
Battery
connector