Delta OHM HD35AP series, Руководство по эксплуатации

Страница: 109 / 146

HD35
- 109 -
V1.12
Address Type Input Register description AP ED RE AL
10002 W Day of last measurement.

10003 W Hour of last measurement.

10004 W Minutes of last measurement. 
10005 W Seconds of last measurement. 
10006 W Packet Error Rate in % of the device (x10).
  
10007 W Number of RF hops of the last transmitted packet.   
10008 SW RF signal level in dBm (relating to last RF hop).   
10009 W
Battery level:
0=empty, 1=half full , 2=full, 3=external power supply
   
10010 W Time, in seconds, elapsed since the last transmitted packet.   
10011 W RF signal level expressed as 0 to 7 scale.
  
10012 W Modbus address of the AP to which the device is connected.   
10013 W
Password level for the current connection:
0=no password, 1=user level, 2= administrator level

10014 W Battery remaining capacity in %.  
10015 W Estimation of battery remaining capacity in hours (x10).  
10016 W Type of power supply: 0=battery, 1=USB, 2=ext. power supply
 
10017 W Estimation of battery remaining capacity in weeks
 
10018 W
Alarm relay #1 status:
0=deactivated, 1=intermittent, 2=active, 3=undetermined

10019 W
Alarm relay #2 status:
0=deactivated, 1=intermittent, 2=active, 3=undetermined

TAB. 12.5: Holding Registers – Read/Write parameters
Address Type Holding Register description AP ED RE AL
Measurement alarm thresholds
0 SW Lower alarm threshold for
TEMPERATURE
with NTC10K sensor of
channel 1 in the set measurement unit (x10).

1 SW Higher alarm threshold for temperature with NTC10K sensor of
channel 1 in the set measurement unit (x10).

2 SW RH lower alarm threshold in % (x10). Only for models …TC
and …TV.

3 SW RH higher alarm threshold in % (x10). Only for models …TC
and …TV.

4 SW D
EW POINT
lower alarm threshold in the set measurement unit
(x10).

5 SW Dew point higher alarm threshold in the set measurement unit
(x10).

6 SW P
ARTIAL VAPOR PRESSURE
lower alarm threshold in hPa (x100). 
7 SW Partial vapor pressure higher alarm threshold in hPa (x100). 
8 SW M
IXING RATIO
lower alarm threshold in g/Kg (x10).

9 SW Mixing ratio higher alarm threshold in g/Kg (x10).

10 SW A
BSOLUTE HUMIDITY
lower alarm threshold in g/m 3 (x10). 
11 SW Absolute humidity higher alarm threshold in g/m 3 (x10).

12 SW W
ET BULB TEMPERATURE
lower alarm threshold in the set measure-
ment unit (x10).

13 SW Wet bulb temperature higher alarm threshold in the set measure-
ment unit (x10).
