Delta OHM D35ED-ALM, Руководство пользователя

Страница: 29 / 88

- 29 -
Fig. 8.3.2: graphic LCD
Use the key to scroll the measured or calculated quantities on the display.
Fig. 8.3.3: selecting the quantities to be displayed
Below please find the indications corresponding to the various quantities in the two types of LCD.
TAB. 8.3.1: indication of quantities on display
Graphic LCD
Quantity Custom LCD
Main line Secondary line
Temperature
(*)
°C or °F stable Temperature Temp
Relative humidity % RH Relative humidity RH
Dew point Td alternated to °C or °F Dew point Dew point
Partial vapour pressure PVP alternated to m.u.
(**)
Partial vapor pressure PVP
Mixing ratio G/kG Mixing ratio Mix ratio
Absolute humidity G/m
3
Absolute humidity Abs hum.
Wet bulb temperature Tw alternated to °C or °F Wet point Wet point
Atmospheric pressure PRES alternated to m.u.
(**)
Atmospheric pressure Atm. Pres
Differential pressure PRES alternated to m.u.
(**)
-- --
Carbon monoxide -- Carbon monoxide CO
Carbon dioxide -- Carbon dioxide CO
2
Illuminance LUX -- --
UVA irradiance mW/m
2
-- --
Proportion of UV present µW/lm -- --
RF signal power RSSI alternated to dBm Received signal strength RSSI
Percentage of RF errors PER % Packet error rate PER
RF hops HOP Number RF hops RF Hops
(*)
In models with more than one temperature channels, the display shows also the number of channel
the shown value refers to.
(**)
m.u. = unit of measurement
Different measurement units can be set for certain quantities. The setting can be done through
the HD35AP-S software (see the software instructions) or by accessing the configuration menu
with the front keyboard (see paragraph The menu in LCD data loggers on page 30).
Battery level
Logging status
Date
Secondary lines
Connection status
RF signal level
Time
Main line