- 22 -
7
HD35RE REPEATER
7.1
D
ESCRIPTION
1.
RF Antenna.
2.
POWER LED: red color, it indicates the presence of the external power supply; it blinks if
the battery is charging.
3.
BATTERY LED: green color, it indicates the internal battery charge level. When the indicator
light is steady on, the battery is fully charged; as the battery is running low, the LED blinks
with a lower and lower frequency (the blink period increases of 1 second for each 10% de-
crease of the battery charge).
4.
Connector for external 6 Vdc power supply (
SWD06
).
5.
Mini-USB connector for PC connection. Use reserved for technical assistance.
6.
Connection button.
7.
Green RF LED: it blinks if the data transmission was successful.
8.
Red RF LED: it blinks to signal that data transmission has failed.
The green and red RF LEDs blink simultaneously if the device is in error condition.
Power supply
: since the repeater is normally not always connected to a computer, it is advis-
able to use an external power supply, since the internal battery life is of a few days.
7.2
C
ONNECTION TO THE WIRELESS NETWORK
The device can be connected and disconnected to/from the wireless network by
pressing for
5 seconds
the connection button on the front panel (see step 6 of paragraph 7.1).
If the device is disconnected, by pressing the connection button for 5 seconds the buzzer emits
a beep and the green LED activates for one second to indicate the start of the connection pro-
cedure. If the device belongs to a wireless network and the base unit is reachable, once con-
nected, the buzzer emits a second beep and the green RF LED will blink during data transmis-
sion. If the device doesn’t belong to a wireless network or the base unit cannot be reached,
the second beep of the buzzer is not emitted and the red RF LED will blink.
If the device is connected, by pressing the connection button for 5 seconds the buzzer emits a
beep, the red RF LED activates for one second and the device is disconnected.
