- 82 -
HD35.03
Plastic support for removable installation of base units, repeaters and data
loggers in indoor-use housing.
HD35.11K
Pair of flanges in anodized aluminum alloy for fixed installation of base
units, repeaters and data loggers in indoor-use housing. Lock pin and pad-
lock included.
HD35.24W
Flange for fixing to the wall the models HD35EDW... in waterproof housing.
HD35-ANT
Spare external RF antenna for HD35AP… base units and HD35RE repeater.
HD35-BAT1
Lithium-ion
rechargeable
3.7 V battery, capacity 2250 mA/h, JST 3-pole
connector. For HD35AP… base units and HD35RE repeater.
HD35-BAT2
Lithium Thionyl Chloride (Li-SOCl
2
)
non
rechargeable
3.6 V battery, AA
format, Molex 5264 2-pole connector. For HD35ED… data loggers and
HD35ED-ALM alarm module.
HD2003.77/40
Clamping for fixing the waterproof housing to the 40 mm diameter mast.
HD2003.71K
40 mm diameter mast kit, 2 m high, in two pieces.
HD2003.75
Base for 40 mm diameter mast, with tip to be driven into the ground.
HD2003.78
Base for 40 mm diameter mast, to be fixed to the floor.
HD2003.75K
Mast bracing kit, for ground installation, fixing diameter 2m. Stainless steel
string.
HD2003.78K
Mast bracing kit, for floor installation, fixing diameter 2m. Stainless steel
string.
HD2003.2.14
Three sectors flange for
∅
40 mm tube, 6 inputs
∅
16 mm.
HD2004.20
40 mm diameter tripod kit. 3 m high. It can be fixed on a surface with
screws or on the ground by means of pegs.
HD9217TF1
Protection shield against solar radiations for outdoor installation. For wa-
terproof HD35EDW… data loggers.
Accessories for humidity probes
HD75
Saturated solution to check Relative Humidity probes at 75 % RH, includes
ring adapter for 14 mm diameter probes, thread M12×1.
HD33
Saturated solution to check Relative Humidity probes at 33 % RH, includes
ring adapter for 14 mm diameter probes, thread M12×1.
Accessories for CO sensor
MINICAN.12A
Nitrogen bottle for CO calibration at 0 ppm. Volume 20 liters.
With ad-
justment valve.
MINICAN.12A1
Nitrogen bottle for CO calibration at 0 ppm. Volume 20 liters.
Without ad-
justment valve.
ECO-SURE-2E CO
Spare CO
Sensor.
HD37.36
Connection tube kit between instrument and MINICAN.12A for CO calibra-
tion.
DELTA OHM metrology laboratories LAT N°
124 are accredited by ACCREDIA for Temperature,
Humidity, Pressure, Photometry / Radiometry, Acoustics and Air Velocity. They can supply
calibration certificates for the accredited quantities.