Delta Electronics HMC Series, Руководство пользователя

Страница: 49 / 108

HMC Take-out Robot for Injection Molding Machine
June, 2015
49
(2)
Program command: It displays the command of current program. Target command
will be highlighted. When this function is disabled, you can directly click on the
command that you wish to see or modify. The command editing window will pop up.
(3)
Command tracking: When this function is enabled, the target command is the
current command. When it is disabled, users can select the target command and set
up the parameters of the command.
(4)
Command display: When tracking function is disabled, clicking on this button can
check the content of previous, next command, and command content on previous or
next page.
(5)
Pause: Click on [Pause], the system will temporarily stop. Button of [Operating] will
glitter. Double click the [Pause] button to resume the operation.
(6)
Stop: Click on [Stop], the system will stop operating after completing the current
command. If the current command has not been completed, click on [Stop] again to
resume the operation.
(7)
Cycle stop: Click on [Cycle stop], the system will stop operating when the current
cycle ends. Then, a window will pop up. Click on [Cycle stop] again to resume the
operation.
To immediately stop the operation, please click on [Pause] when the cycle stops. A
pop-up window will appear then. Users also can directly click [EMS] button.
(8)
Completed cycle
:
The complete cycle number in one auto operation.
(9)
Remainder : Users can set up the total number of the product in [Production setting].
The residual number is the result that deducts [Number of the complete cycle] from
[Total number of production]. If there is no need to set up the number of production,