DeLonghi ETAM29.66X, Инструкция по эксплуатации

Страница: 24 / 25

23
PROBLEM POSSIBLE CAUSE SOLUTION
The coffee is not hot. The cups were not preheated. Warm the cups by rinsing them with hot
water (Please note: you can use the hot water
function).
The infuser has cooled down because
2/3 minutes have elapsed since the last
coffee was made. Before making the coffee, heat the infuser by
rinsing using the rinse function (page 10).
A low coffee temperature is set. Set a higher coffee temperature in the menu
(page 12).
The coffee is weak or not creamy
enough. The coffee is ground too coarsely. Turn the grinding adjustment dial one click
anticlockwise towards “1” while the coffee mill
is in operation (fig. 11). Continue one click at
a time until coffee delivery is satisfactory. The
effect is only visible after delivering 2 coffees
(see the section: “Adjusting the coffee mill” on
page 13).
The coffee is unsuitable. Use pre-ground coffee for espresso machines.
The coffee is delivered too slowly or a
drop at a time. The coffee is ground too finely. Turn the grinding adjustment dial one click
clockwise towards “7” while the coffee mill is
in operation (fig. 11). Continue one click at a
time until coffee delivery is satisfactory. The
effect is only visible after delivering 2 coffees
(see the section: “Adjusting the coffee mill” on
page 13).
Coffee does not come out of one or
both of the spouts. The spouts are blocked. Clean the spouts with a toothpick (fig. 29).
The appliance does not come on The connector is not inserted correctly. Insert the connector as far as it will go in the
socket at the back of the appliance (fig. 1).
It is not plugged into the mains socket. Plug into the mains socket.
The main switch (A14) is not turned on. Press the main switch (fig. 2).
The infuser cannot be extracted The appliance has not been turned off
correctly
Turn the appliance off by pressing the (but-
ton (page 10).
The milk does not come out of the
milk spout. The milk container lid is dirty. Clean the milk container lid as described in the
section “Cleaning the milk container” (page
18).
TROUBLESHOOTING
Below is a list of some of the possible malfunctions.
If the problem cannot be resolved as described, contact Customer Services.