DeLonghi ETAM29.66X, Инструкция по эксплуатации

Страница: 13 / 25

12
3. Press the icon (fig. 6). “Disable?” is displayed (or “Ena-
ble?” if the function has been disabled);
4. Press the icon to disable (or enable) energy saving
mode;
5. Press the icon to exit the menu.
When the function is active, if the machine is not used for some
time, “Energy saving” is displayed.
Please note!
• When in energy saving mode, a few seconds elapse before
the first coffee, cappuccino or milk based coffee is delivered
as the appliance must heat up again.
• To prepare any drink, press any icon to exit energy saving,
then press the icon corresponding to the drink you want to
make.
• If the milk container is inserted, “Energy saving” is not
activated.
Setting the temperature
To modify the temperature of the water used to make the coffee,
proceed as follows:
1. Press
the icon (B2) to enter the menu;
2. Press or (fig. 5) until “Set temperature” is
displayed;
3. Press the icon (fig. 6);
4. Press or until the required temperature is dis-
played (
O
=low;
OOOO
=maximum);
5. Press the icon to confirm;
6. Press the icon to exit the menu.
Setting water hardness
For instructions on setting water hardness, see page 19.
Setting the language
To modify the language of the display, proceed as follows:
1. Press the
icon (B2) to enter the menu;
2. Press or (fig. 5) until “Set language” is
displayed;
3. Press the icon (fig. 6);
4. Press the or button until the required lan-
guage is displayed ;
5. Press the icon to confirm;
6. A message confirming the language installed is displayed;
7. Press the
icon to exit the menu.
Beep
This enables or disables the buzzer emitted by the machine each
time an icon or button is pressed or an accessory is inserted/
removed. To disable or re-enable the beep, proceed as follows:
1. Press the
icon (B2) to enter the menu;
2. Press or (fig. 5) until “Beep” is displayed;
3. Press the icon (fig.6), “Disable?” is displayed; (or “Ena-
ble?” if the function has been disabled);
4. Press the icon to enable or disable the beep;
5. Press the icon to exit the menu.
Default values (reset)
This resets all menu settings and programmed quantities back
to the default values (with the exception of the language which
remains as set).
To reset the default values, proceed as follows:
1. Press the
icon (B2) to enter the menu;
2. Press or (fig. 5) until “Default values” is
displayed;
3. Press the icon (fig. 6);
4. The message “Confirm?” is now displayed;
5. Press the
icon to confirm and exit.
Statistics function
This displays statistics relating to the machine. To display, pro-
ceed as follows:
1. Press the
icon (B2) to enter the menu;
2. Press or (fig. 5) until “Statistics” is displayed;
3. Press the icon (fig. 6);
4. By pressing or you can check:
- how many coffees have been made;
- the total number of cappuccinos and milk based coffees
made;
- the total number of litres of water delivered;
- how many times the machine has been descaled;
- how many times the water softener filter has been
replaced.
5. Press the icon twice to exit the menu.
MAKING COFFEE
Selecting the coffee taste
The appliance is set by default to make coffee with a standard
taste.
You can also choose one of these tastes:
Extra-mild taste
Mild taste
Standard taste